A targeted skincare duo designed to restore moisture, improve elasticity, and promote a healthy glow. The LED Light Therapy Face Mask helps boost collagen production, smooth fine lines, and enhance overall skin tone. Paired with the Hyaluronic Acid Serum, it delivers deep hydration and visibly plumps the skin for a firmer, more refreshed appearance. Ideal for dull, dehydrated, and tired-looking skin. Clinically inspired care for radiant, revitalized results. Regular use supports skin renewal and helps defend against environmental stressors. Reveal smoother, softer, and more luminous skin with every application.

1. Clean your face and let it air dry or gently pat with a soft towel, avoiding
harsh rubbing.
2. Attach the elastic bands to the mask and connect it to the power control box.
3. Long press the power button for 3 seconds to start; colors change automatically
with each short press.
4. Position the mask comfortably on your face and adjust the straps around
your ears for a secure fit.
5. Use while resting for 15-30 minutes, avoiding reading or screen time.
6. After use, remove the mask, clean your face, and store the device properly.
7. For the best results, use with any skincare products or a disposable mask.

Advanced Light Therapy for Hands
A next-generation skincare solution designed to rejuvenate, firm, and brighten the skin through targeted LED light technology. Made with flexible, skin-safe silicone, the gloves deliver effective phototherapy to support collagen production, reduce blemishes, and enhance overall skin tone—comfortably and hands-free.

1. Clean Your Hands:
Wash your hands and dry them with a soft towel.
2. Connect the Device:
Plug the USB cable into the controller and connect it to a power source (like a USB adapter or power bank).
3. Put on the Gloves:
Wear the LED gloves comfortably on both hands.
4. Turn On the Device:
Press the Power Button to switch on the gloves.
5. Choose a Light Mode:
Press the Color Button to select the light that matches your skin needs:
6. Set the Time:
Press the Time Button to choose how long you want to use it.
Recommended: 15–30 minutes per session.
7. Adjust the Brightness:
Short press the Power Button to change light strength if needed.
8: Relax During Treatment:
Sit or lie down comfortably. Avoid looking directly at the lights.
9. Finish and Turn Off:
When the session is over, press the Power Button to turn off.
Disconnect the power and store the device in a dry place.

Rechargeable, wireless, and ultra-lightweight — this 7-color LED therapy mask features 944 high-intensity light beads to help reduce fine lines, brighten skin, and improve texture. Flexible silicone design with adjustable intensity and 10–30 minute treatments for effortless skincare at home.
Visible results with consistent use — rejuvenate your skin with every session.

1. Preparation:
Clean your face thoroughly and ensure the mask is also sanitized before use.
Fully charge the mask using a 5 V/1 A adapter (charging completes in approx. 4 hours). The indicator light will stop flashing once fully charged.
2. Wearing the Mask:
Secure the adjustable silicone strap so the mask fits snugly on your face.
3. Powering On:
Press and hold the Power button for approximately 2 to 2.5 seconds. A beep will sound and the red LED on the mask will light up.
4. Select Light Color/Mode:
Press the Mode (M) button to cycle through up to 7 colors: red, green, blue, purple, cyan, orange, and yellow. Near-Infrared can also be selected.
5. Adjust Light Intensity:
Press the E button to toggle through three intensity levels—1, 2, and 3 (with 3 being the brightest).
6.Set Treatment Time:
Use the T+ button to increase or T− button to decrease time. Choose between 10, 15, 20, 25, or 30 minutes.
7. Use Near Infrared Light:
Press the NIR button to turn Near-Infrared on or off.
It can be used alone or in combination with any color mode.
8. During Treatment:
The device runs for the selected time and shuts off automatically once complete.
It can also be used while plugged in, but this is not recommended.
9. Powering Off Manually:
To turn off the device early, press and hold the Power button for about 2.5 seconds until you hear a beep.
10. Post Use Care:
Remove the mask and continue with your skincare routine.
Clean the device using a damp cloth (do not submerge in water).
Allow to air dry in a cool, ventilated place—avoid high heat.

This device combines infrared, red, blue, and orange LED light with nano light-conducting materials and advanced phototherapy technology. It gently massages the skin to stimulate cellular activity, boost metabolism, brighten the complexion, and deliver targeted skin benefits for a healthier, more radiant appearance.

1. Attach the neck piece to the face mask.
2. Clean the mask or apply a facial mask/essence before wearing.
3. Long press the power button for 2 seconds to turn on.
4. Short press to select your desired light mode.
5. The device auto-cycles: Red + IR (10 min)-Blue (10 min) - Orange (5 min) - Auto shut-off.
6. You can also manually select a light and allow it to auto shut off after one cycle.
7. Recommended usage: 2–3 times per week.
8. Charging methods: Charging base or USB Type-C.

A sleek, handheld skincare tool designed to lift, tone, and rejuvenate the face and neck. Combining EMS microcurrent, gentle heat, vibration, and ion technology, this device enhances product absorption, boosts circulation, and supports firmer, more radiant skin. Ideal for daily use, it helps reduce the appearance of fine lines while promoting a contoured, V-shaped silhouette. Lightweight and rechargeable, it fits seamlessly into any skincare routine.

Directions To Use:
1. In the shutdown state, long press the first button for 1.5 seconds to
power on. The device will start in Import Mode.
2. Short press the button to switch between modes in this order:
Import → EMS → HOT → Beauty
3. Press the second button to adjust intensity under any active mode.