Crafted from premium medical-grade soft silicone, this advanced phototherapy device features separate Face and Neck Masks designed for a flexible, lightweight, and comfortable fit. Equipped with a 7-colour LED light therapy system and an intelligent digital controller, it offers adjustable light modes, brightness levels, and treatment times for a personalized skincare experience. The rechargeable USB Type-C controller, ergonomic design, and adjustable fastening straps ensure convenient, comfortable, and effortless use at home or while travelling.

How to Use:

1. Fully charge the controller (approximately 4 hours) before first use.
2. Perform a 10-minute skin sensitivity test on your arm before using the device for the first time.
3. Cleanse and thoroughly dry your face and neck before treatment.
4. Connect the Face Mask and/or Neck Mask to the controller. Both masks can be used independently or together.
5. Secure the masks using the adjustable fastening straps for a comfortable fit.
6. Press and hold the Power button for 2 seconds to switch the device on.
7. Short-press the Mode button to select the desired LED light color.
8. Adjust the brightness level and treatment time using the controller.
9. Use for 10–15 minutes per session, 3–5 times per week, or as part of your regular skincare routine.
10. Press and hold the Power button for 2 seconds to switch the device off after the treatment.
11. Remove the Face Mask and Neck Mask, then apply your preferred skincare products.
12. Clean the masks and controller with a soft, dry or slightly damp cloth after each use. Do not immerse in water.
13. Recharge the controller only when required and do not use the device while charging.
14. Store the Face Mask, Neck Mask, and controller in a cool, dry place away from direct sunlight and excessive heat.

Featuring advanced 7-colour LED light technology, this lightweight, flexible silicone mask is designed to complement your daily skincare routine. Its ergonomic full-face design with integrated ventilation holes provides a comfortable, breathable wearing experience, while the one-touch operation makes it simple to use. Multiple light modes allow you to personalise your skincare routine, and the rechargeable USB charging design offers convenient cordless use for quick 10–15 minute sessions at home or while travelling.

How to Use:

1. Ensure the device is fully charged before first use.
2. Cleanse and dry your face thoroughly before each treatment. For best results, apply your preferred skincare serum before wearing the mask, if desired.
3. Adjust the elastic head straps to ensure the mask fits comfortably and securely over your face.
4. Press and hold the Power Button for 3 seconds to switch the device on. The device will enter standby mode.
5. Press the Power Button briefly to cycle through the available LED light modes and select the mode that best suits your skincare routine.
6. Wear the mask and relax during the treatment. Keep your eyes closed throughout the session and avoid looking directly at the LED lights.
7. Use the mask for approximately 10–15 minutes per session. For best results, use the device 3–5 times per week as part of your regular skincare routine.
8. Press and hold the Power Button for 3 seconds to switch the device off after use.
9. Remove the mask and wipe it clean with a soft, slightly damp cloth. Do not immerse the device in water or use abrasive cleaners.
10. Allow the mask to dry completely before storing it in a cool, dry place away from direct sunlight and excessive heat. Avoid excessive bending or folding during storage.

Designed for everyday facial skincare, this advanced LED mask combines six-color LED technology with seven intelligent light modes for a versatile skincare experience. The integrated magnetic controller, adjustable intensity, and 10, 20, or 30-minute timer provide convenient session control. A rechargeable 1200mAh battery, USB Type-C charging, and flexible facial design offer comfortable, cordless use as part of a modern self-care routine.

How to Use:

1. Prepare Your Skin: Cleanse your face thoroughly and dry it completely before use. Make sure your skin is free from makeup, oils, creams, or other residues.
2. Prepare the Mask: Attach the eye protection cushions and fixing straps securely to the mask.
3. Attach the Controller: Place the magnetic controller onto the designated attachment point on the mask. Make sure it is securely connected before use.
4. Power On: Press and hold the Power/Mode button to turn on the device. When the device is powered on, “P1” will be displayed on the numerical display.
5. Select the Light Mode: Briefly press the Power/Mode button to switch between the available modes in sequence.
6. Adjust the Intensity: Use the “+” and “−” buttons to increase or decrease the LED light intensity. Choose a comfortable intensity level.
7. Set the Treatment Time: Press the Power/Mode button to select the desired treatment duration: 10, 20, or 30 minutes. The default setting is 30 minutes.
8. Wear the Mask: Place the mask comfortably over your face and adjust the fixing straps so it sits securely. Ensure the eye protection cushions are positioned correctly.
9. Begin Your Session: Once the desired mode, intensity, and treatment time have been selected, allow the mask to operate for the chosen duration. Remain relaxed during the session and do not exceed 30 minutes per use.
10. Complete the Session: The device will automatically stop when the selected time has elapsed. To stop the session manually, press and hold the Power/Mode button until the device switches off.

A wearable LED facial beauty device featuring seven light wavelengths to complement different skincare routines. The full-face design provides even light coverage, while one-touch operation makes it easy to switch between light modes. Designed for convenient at-home use, it offers customizable light therapy, a relaxing beauty experience, and a simple way to enhance your regular skincare routine.

How to Use:

1. Cleanse your face and allow the skin to dry naturally.
2. Before first use, fully charge the device using the provided USB cable.
3. Adjust the elastic straps and place the mask comfortably over your face.
4. Press and hold the touch control for 3 seconds to switch on the device.
5. Touch the control to select the desired LED light mode. The light changes with each touch.
6. Use the mask for 15–30 minutes per session.
7. When finished, remove the mask and switch off the device.
8. Clean the mask with a soft, slightly damp cloth and allow it to dry before storing

Designed to elevate your daily skincare routine, this premium LED Face Mask combines advanced multi-wavelength LED technology with a flexible, ergonomic silicone design for exceptional comfort and effortless wear. Four customizable light modes allow you to tailor each session to your skincare preferences, while the lightweight, hands-free construction and cordless rechargeable design provide complete freedom of movement. Featuring an intelligent 10-minute automatic timer and even light distribution across the face, it delivers a relaxing, spa-inspired skincare experience in the comfort of your home.

How to Use:

Before using the LED Face Mask for the first time, inspect the Device. Remove all components from the packaging and ensure the mask, controller, and accessories are complete and free from visible damage. Do not use the device if any part is damaged.

Perform a Skin Sensitivity Test: Before your first treatment, test the device on the inside of your forearm for 3 minutes. If no redness or irritation appears within 24 hours, the device is ready for normal use. Discontinue use if any discomfort or irritation occurs.

1. Step 1: Prepare Your Skin: Remove all makeup and cleanse your face thoroughly before use. Apply toner if desired for light hydration. Avoid using photosensitive skincare products or products containing whitening ingredients before treatment.
2. Step 2: Connect the Device: Connect the controller to the LED face mask using the supplied connection cable. Ensure both ends are securely connected before use.
3. Step 3: Wear the Mask: Place the mask comfortably over your face and adjust the straps until it fits securely. Position the head strap centrally on the back of your head for a stable and comfortable fit.
4. Step 4: Select Your Preferred Mode: Press and hold the power button for 1–2 seconds to switch on the device. Short-press the button to cycle through the four LED modes.
5. Step 5: Enjoy Your Treatment: Relax while wearing the mask. Each treatment mode runs for 10 minutes, after which the session automatically ends. For extended treatments, you may select another mode after the cycle has finished.
6. Step 6: After Use: Remove the mask, wipe it clean with a soft, slightly damp cloth or a non-alcoholic wet wipe, and store it in a cool, dry place until your next treatment.

Types of Modes:

• Brightening Mode: Enhances your skin's natural radiance for a brighter, more luminous-looking complexion.
• Skin Tightening Mode: Complements your skincare routine by helping improve the appearance of firmer, smoother-looking skin.
• Acne Care Mode: Suitable for blemish-prone skin and helps maintain a balanced, clearer-looking complexion.
• Soothing Mode: Helps comfort the skin and maintain a calm, refreshed appearance after daily environmental exposure.

Elevate your skincare ritual with advanced light-based beauty technology, thoughtfully designed for a modern at-home experience. The contoured mask follows the natural shape of the face for comfortable, even coverage, while multiple light modes allow you to tailor your routine to your preferences. Its multi-spectrum light system combines complementary wavelengths in one versatile device, offering a more personalized light-care experience. The ergonomic 3D design and adjustable Velcro fit provide enhanced facial coverage with a secure, comfortable feel during each session.

How to Use:

1. Step 1 – Cleanse: Remove makeup and cleanse the skin thoroughly before use.
2. Step 2 – Connect & Fit: Connect the mask to the controller using the Type-C cable. Check the battery level and adjust the Velcro straps for a comfortable fit.
3. Step 3 – Select Mode & Time: Press and hold the Power button for 1.5 seconds to turn on the device. Press T to select 5, 10, or 15 minutes, and press M to select one of the four light modes.
4. Step 4 – After Treatment: Apply a hydrating face mask or continue with your regular skincare routine. Keep skin hydrated and use sun protection daily.

4 Light Modes:  

1. Mode 1 – Calm | Green Light 525 nm: For a calming skincare routine and a refreshed skin appearance.
2. Mode 2 – Brighten | Yellow Light 590 nm: For a brightening skincare routine and an even-looking complexion.
3. Mode 3 – Rejuvenation | Red Light 660 nm: For a rejuvenating skincare routine and a refreshed, radiant-looking complexion.
4. Mode 4 – Tighten | Red + Near-Infrared Light 660 nm + 850 nm: For a firming skincare routine and firmer, smoother-looking skin.
5. For all modes: Keep skin hydrated and use sunscreen as part of your daily skincare routine.

Before First Use  

1. Perform a 1-minute skin sensitivity test before regular use.
2. Start with 5 minutes and increase gradually according to skin tolerance.
3. Recommended use: 3–4 times per week for 10–15 minutes per session.
4. Do not use for longer or more frequently than recommended.
5. Temporary marks around the eyes may occur after prolonged wear.

Meet the SkinLift Pro OneTouch LED Mask—your at-home shortcut to a professional-grade facial. Engineered with advanced phototherapy technology, this sleek, lightweight mask targets multiple skin concerns simultaneously to lift, firm, and rejuvenate your complexion.

With its effortless OneTouch control, you can seamlessly switch between targeted light wavelengths to kickstart collagen production, calm stubborn redness, and eliminate breakout-causing bacteria. Whether you are looking to smooth out fine lines or bring back a youthful glow, the SkinLift Pro delivers visible, non-invasive results from the comfort of your couch. No appointments, no complex setups—just pure, radiant skin made simple.

Key Benefits

• Collagen & Elasticity Boost: Firms sagging skin and visibly reduces the appearance of fine lines.

• OneTouch Simplicity: A single, intuitive button controls your entire treatment session.

• Complexion Clarifying: Helps soothe inflammation, reduce dark spots, and prevent future breakouts.

• Comfort-Fit Design: Lightweight and ergonomically shaped to distribute light evenly across your forehead, cheeks, and jawline.

How to Use Your SkinLift Pro

To get the absolute best results from your LED mask, order is everything. Light wavelengths cannot easily penetrate through thick layers of creams or makeup, so always treat on bare skin first.

1. Prep Your Skin

Thoroughly wash your face to remove all makeup, oil, and sunscreen. Pat your skin completely dry.

Note: Do not apply any serums or creams yet, as they can block the LED light from penetrating your skin.

2. Fit and Secure

Place the mask over your face and adjust the strap around the back of your head. Ensure it fits snugly and comfortably against your skin.

3. OneTouch Power On

Press and hold the OneTouch button to turn the device on. Tap the button again to cycle through and select your desired light therapy mode.

4. Relax and Treat

Leave the mask on for your 10 to 15-minute treatment session. Close your eyes, sit back, and relax. The mask will automatically shut off or notify you when the session is complete.

5. Boost with Skincare

Remove the mask. Your skin is now perfectly primed to absorb nutrients. Apply your favorite serums (like Hyaluronic Acid) and finish with your regular moisturizer.

6. Clean and Store

Wipe down the inside of the mask with a soft, slightly damp cloth or an alcohol wipe. Allow it to air dry, then store it in a cool, dry place

Pro-Tip for Consistency: For optimal results, use the mask 3 to 5 times a week. Consistency is key with light therapy—you will start noticing a smoother, brighter complexion within 4 to 6 weeks of regular use.